Sale!

John Deere 2032R Compact Tractor

$22,410.00

Deere Days of Summer: $1,500 Bonus for a Limited Time!

  • 0% Financing for 72 Months
  • Exclusive 10 Year Warranty, Only at Van Wall!

Images may depict options and attachments not included in base price. Offers valid 6/2/21 to 8/3/21.

Apply for Financing

Get More Information

Get More Information

Buy Online

Risk Free Guarantee

Risk Free GuaranteeWe guarantee you will be 100% satisfied with your purchase or we will refund or exchange it for free.

Pricing does not include applicable freight, setup, taxes, delivery, and other fees.

The ultimate mini 32 hp landscaper, brush cutter, snow remover.

Now, perhaps you have a bit more of a project to chew on. The 2032R provides greater speed and more capacity to handle larger implements. Plus, the weight of this model offers enhanced stability to plow through a tough job.

The 2032R Compact Utility Tractor is the ultimate 2 if you have bigger tasks to dig into. Really, the options are everything. To build a fleet. To clear snow from a park path or sweep clean a sidewalk. Trim brush from around your property or stack small square bales in the barn.

  • Compatible with 60D and 72D AutoConnect™ Drive-Over Mower Decks
  • Standard Four-Wheel Drive (4WD), Cruise Control, & Folding ROPS
  • iMatch™ Compatible
  • See Ways to Save

 

Engine

The 1.642 liter (100.2 cu in.) displacement, liquid-cooled 3TNV88C-NJT Yanmar® diesel engine provides 30.7 hp (22.9 kW) to the 2032R. The engine uses the latest technologies to optimize fuel economy, improve control and accuracy, and reduce environmental impact.

  • The common rail system (CRS) optimizes fuel economy and reduces operating costs. High-pressure injection atomizes fuel into finer particles which burn more completely. It results in improved fuel economy and a lower cost of operation.
  • The electronic control unit (ECU) provides optimum fuel control and accuracy. ECU monitors and controls the engine. It continuously monitors engine conditions and adjusts the fuel delivery accordingly to ensure optimum performance and emissions.
  • Economical cast-in-block cylinder design for good cooling and long life.
  • Direct fuel injection improves starting, injects fuel directly on top of pistons for more efficient combustion, and develops more horsepower per gallon of fuel than indirect injection engines.
  • Aluminum-alloy pistons are lightweight to reduce connecting rod bearing loads and provide good heat transfer characteristics.
    • Design permits tighter tolerances and neutralizes expansion of the piston, which reduces blow-by and noise from piston slap.
    • Top rings are higher on the piston and a thinner head gasket is used to greatly reduce the volume of unburned waste gases and increase combustion efficiency.
  • Timing gears and injector drive gears have a helical profile to reduce engine noise.
  • Auto-bleed fuel system means there is no special bleeding required if the tractor runs out of fuel. This system will self-prime the injection pump, lines, and injectors, providing fast fuel recovery.
  • High-capacity lubrication system provides filtered oil, under pressure, to all engine bearings for long life.
  • Fuel filter with replaceable element.
  • Water separator with additional replaceable filter element.
  • See-through coolant recovery tank permits operator to check coolant level without removing radiator cap.
  • Dry-type air cleaner with safety element.
    • Dual element design for added engine protection.
    • Air cleaner service indicator is standard equipment on all models and alerts the operator on the instrument panels.
  • Easy access to engine check and fill points on the right-hand side of the tractor by removing the side panels.

Yanmar® is a trademark of Yanmar Co., Ltd.


Engine Aftertreatment System

The engine comes with an aftertreatment system. The exhaust filter consists of a diesel particulate filter (DPF) which captures particulate matter (PM) contained in the exhaust gas. Using a natural cleaning process, most of the PM trapped in the exhaust filter is eliminated by the heat of the exhaust stream generated by normal use. In situations of low temperature, engine speed, or load factor, an active cleaning cycle is initiated. In this cleaning cycle, the exhaust gas temperature is raised by injecting additional fuel during the exhaust stroke of normal vehicle operation to the diesel oxidation catalyst (DOC). After many hours of use, the exhaust filter may require an ash removal service.

Depending on the load that the tractor is under, as well as ambient temperature, humidity, and engine speed, the DPF may build up with particulate matter, thus requiring cleaning. Filter cleaning is determined by one of three conditions:

  • A prescribed time-based estimation of needed filter cleaning.
  • DOC/DPF pressure sensors.
  • A particulate matter buildup estimation based on load conditions.

Once one of the three conditions have been met, filter cleaning will occur. There are three types of filter cleaning processes:

  • Passive Filter Cleaning: Passive filter cleaning occurs naturally when the engine is generating enough heat to oxidize particulate matter. This automatic process occurs continuously during normal operating conditions. No tractor icons or symbols appear on the display during passive filter cleaning. NOTE: Passive filter cleaning requires no operator involvement, and there is no interruption to tractor operation.
  • Active Filter Cleaning: If conditions (temperature, load, or speed) for passive filter cleaning cannot be achieved, then particulate matter is removed using active filter cleaning. To achieve the required conditions, exhaust temperature management (ETM) manages the initiation and duration of active filter cleaning. ETM can adjust numerous engine parameters and/or inject a small quantity of fuel into the exhaust stream for a short duration. The fuel turns to vapor and chemically reacts with the catalysts in the DOC to create heat to oxidize particulate matter. It is important to note that at no time is fuel in the DOC/DPF ignited, and there is no interruption to tractor operation. Like passive filter cleaning, active filter cleaning requires no operator involvement, and there is no interruption to tractor operation.
  • Parked Filter Cleaning: In some instances where passive and active filter cleaning have not fully cleaned the particulate matter from the system, a parked filter cleaning may need to take place. Most likely, the only time a parked filter cleaning will need to occur is when automatic filter cleaning has been disabled for an extended period of time and multiple warnings to engage filter cleaning were ignored, or if the tractor has been used during light load conditions. Additionally, when the automatic filter cleaning process has been deliberately interrupted multiple times, or if active filter cleaning has failed numerous times due to a failed component, a parked filter cleaning may be requested. In these rare instances the operator will have to park the tractor and start the filter cleaning process. The parked filter cleaning process needs to be activated based on usage and operation of the tractor. The process will take approximately 30 minutes. See operator’s manual for more details.

The emissions system on this engine constantly monitors the soot level of the tractor, making sure the tractor is always in peak performance condition. This ensures high performance at all times.

NOTE: Number of hours since last regeneration and soot level percentage viewable on LCD display.


Transmission

The 2032R and 2038R Tractors are equipped with a two-range hydrostatic transmission (HST) incorporated in a die-cast aluminum transmission case. Fluid under pressure transmits engine power to the drive wheels via a closed-loop pump and motor arrangement. Infinite ground speeds allow the operator to match the speed of the tractor to the job.

  • No clutching for fast and easy direction changes.
  • Twin Touch™ foot pedals for quick and easy forward/reverse operation.
  • Transmission oil cooler cools transmission oil for longer transmission life.

Safety features of the HST include:

  • The tractor will only start with the range lever in neutral. If the range lever is in gear when the key is turned to the start position, the instrument panel instructs the operator to shift to neutral.
  • The engine will shut off if the operator leaves the seat and the power take-off (PTO) is engaged.

John Deere’s Twin Touch™ foot controls offer several key advantages over competitive HST model tractors.

  • Some competitive hydrostatic tractors use a treadle pedal (toe-heel) design foot control for operation of the HST.
  • These require the operator to use both toe and heel to change direction, resulting in increased operator fatigue.
  • The Twin Touch™ configuration also makes it easier to inch forward or rearward (i.e. when attaching to implements).

Sauer-Danfoss® manufacturer provides the integrated pump and motor. This assures that the components are matched to each other, providing maximum efficiency.

  • Provides strength and durability needed for operating such attachments as loaders and backhoes.
  • One reservoir (with one check-point and fill point) for the transmission, differential, and hydraulic system speeds up daily maintenance.
  • Mechanically actuated Twin Touch™ foot pedals allow the operator to select both direction of travel and speed with the touch of a toe.

An electronic cruise control is standard equipment on the 2032R and 2038R Tractors. Cruise control is electronically engaged and disengaged using a toggle switch located on the right-hand console.

  • Maintains desired forward speed without having to touch the forward pedal.
  • To disengage the cruise control, either apply pressure to the brake pedal or disengage the cruise control switch.

Sauer-Danfoss® is a trademark of Sauer-Danfoss Incorporated.


Operator Station

The operator station has been designed to allow for greater operator comfort and increased visibility. The ergonomic layout and convenient color-coded controls allow for easy identification and operation. The design of the operator station allows operators to sit “in” as opposed to “on”, which provides comfort and increased stability.

  • Sloping hood design provides improved visibility.
  • Plenty of room for comfortable operation.
  • Cup holder, multiple storage compartments, and a 12V outlet ensures an organized operator station.
  • Rubberized floor mat design to reduce vibration and noise.
  • Step-through operator platform makes getting on and off the tractor easy.
  • Fender-mounted handrails, large and easy to grab, assist the operator when getting on and off the tractor.
  • Controls have been raised and integrated into the fender for operator comfort and ease of use.
  • Large, easy-to-read decals provide clear instructions for experienced and even non-experienced operators.
  • Front horizontal exhaust for increased operator visibility.
  • If the operator leaves the tractor seat when the transmission, mid PTO, or rear PTO is engaged, the engine will shut down.
    • For applications where out-of-seat PTO operation is required, the following criteria must be met: transmission in neutral, park brake engaged, and PTO selector set to rear only. See operator’s manual for specific instructions.
  • Specially designed panels route hot air flow from the engine compartment under the tractor instead of directly onto the operator.
  • The left-side step allows for easy access on and off the tractor.
  • Foot platform has a non-skid surface.
  • The thick, soft seat padding provides a smooth and comfortable ride. A high, scalloped back makes it easier for the operator to turn to view rear implements.
    • Seat adjusts fore/aft for operator convenience.
    • Seat flips forward for protection from the elements.
    • High seat back and armrests are in base equipment and allow for a more comfortable operation.
    • Retractable seat belt feature prevents the seat belt from becoming tangled in the seat suspension and controls.
  • Tilt steering wheel design is base equipment on the 2032R and 2038R Tractors.
    • Allows the operator to adjust the steering wheel to the most comfortable position.
    • Provides additional clearance for the operator to enter and exit the tractor.
    • Provides easy return to the fully raised position.
    • Provides plenty of room for comfortable operation.
  • Easy-fold ROPS allows tractor to be used or stored in low-clearance environments.

Optional iMatch™ Quick-Hitch

One of the greatest operator concerns involves difficulty in attaching tractor implements. John Deere has addressed this issue with the iMatch™ Quick-Hitch. The iMatch™ Quick-Hitch provides easy hookup and a guaranteed fit for all Category 1 implements that are designed to meet the American Society of Agricultural and Biological Engineers (ASABE) Category 1 Standard S278.6 for quick-attach hitches.

  • All implements require a set of bushings in order for the attachment to fit and work properly with the iMatch™ Quick-Hitch. One set of bushings comes with the iMatch™ Quick-Hitch.
  • Upper Bushing:
    • Inside Diameter: 0.76 – 0.77 in. (1.93 – 1.95 cm)
    • Outside Diameter: 1.24 – 1.25 in. (3.15 – 3.18 cm)
  • Lower Bushing:
    • Inside Diameter: 0.88 – 0.89 in. (2.24 – 2.26 cm)
    • Outside Diameter: 1.43 – 1.44 in. (3.63 – 3.66 cm)

NOTE: These bushings allow the hooks on the iMatch™ and the pins on the implement to fit together properly. All other implements (box blades, tillers, rear blades, etc.) will require a set of bushings to enlarge the pins to fit with the iMatch™ hooks. Bushings of different lengths can be found in the parts system or through a bushing supplier.


CommandCut™

The 2032R and 2038R Tractors feature the CommandCut™ mower deck lift system, which allows quick and accurate adjustments of the mower deck with the turn of a dial and the bump of a lever. Control callouts make operation simple and repeatable. The height of cut setting dial and raise/lower lever are conveniently located on the right-hand console and easily accessible by the operator.

  • Installing CommandCut™ only requires a simple calibration after installation. It is a true “plug-and-play” system as no controller programming is required.
  • Inhibits PTO operation when mower deck is in the install position to prevent PTO driveline and mower deck blade damage.
  • Eliminates the need for hydraulic power and components, thus dedicating all hydraulic capacity to other implements or tract functions.
    • Fewer hydraulic components means fewer hydraulic leaks, especially when working on sensitive turf.
  • Precise height of cut with no drift or leakdown.
    • System can be calibrated to different tire sizes to maintain precision.
  • Minimum effort required to set height of cut and to raise/lower the mower deck, which reduces operator fatigue.
  • Easy-to-read graphical interface on the instrument panel allows operator to glance at the desired height of cut while staying focused on mowing.
  • Built-in transport lock can be activated from the seat by turning the height of cut dial to position 6 and raising the deck to the highest position.

Serviceability

Regular service and maintenance are essential to the performance, productivity, and longevity of the tractor.

  • Tractors are equipped with extensive onboard self-diagnostic capabilities and are fully compatible with the John Deere-exclusive Service ADVISOR™ system.
  • Four quarter-turn fasteners allow operators to easily remove the engine side panels without tools to access the engine compartment.
  • Easy access to regular service points minimizes service time.
  • Daily service checks, such as checking the engine oil or water separator, can be done without opening the hood or removing the tractor side panels.
  • Tractors are equipped with an electronic air filter restriction indicator that alerts the operator when the air filter needs to be cleaned or changed.
  • Daily service requirements are minimal and simple to accomplish. Most service interval requirements can be performed with a basic understanding of procedures and common tools.
  • All external engine, fuel, and transmission filters are easily accessible.
  • Increased service intervals lessen overall cost of ownership.
  • Hydraulic oil service interval increased to 1,200 hours when using Hy-Gard™ products. Hydraulic oil filter will need to be changed every 400 hours.
  • Fuel tank is located on the rear of the tractor to allow for easy access when fueling.
  • Gas-lift hood eliminates the need for a mechanical prop rod.
  • All items in the daily service schedule can be performed without the use of tools.
    • Engine oil, hydraulic oil, coolant level, and the water separator can be conveniently accessed.
    • The engine can be easily accessed by simply raising the hood for more periodic maintenance checks.

NOTE: Always refer to the operator’s manual for complete maintenance and service recommendations.

 

Key Specs

  • Engine Power (Gross, SAE J1995 Rated): 31.2 hp (22.9 kW)
  • Power Take-Off (PTO) Power: 24.2 hp (18 kW)
  • Steering Hydraulics: 4 gpm (15 L/min)
  • Implement Hydraulics: 5.3 gpm (20.2 L/min)
  • Hitch Type: Category 1
  • Lift Capacity (24 in. Behind Link Arms): 1,356 lb (615 kg)
  • Standard Transmission: Hydrostatic Transmission
  • Cruise Control: Standard
  • Approximate Shipping Weight: 
    • Open Station: 2,879 lb (1,306 kg)
    • Cab: Not Applicable
  • Wheelbase: 67.8 in. (1,723 mm)

Engine

  • Manufacturer: Yanmar®
  • Engine Model: 3TNV88C-NJT2
  • Engine Power (Gross, SAE J1995 Rated): 31.2 hp (22.9 kW)
  • Power Take-Off (PTO) Power: 24.2 hp (18 kW)
  • Rated Engine Speed: 2,500 rpm
  • Type: Diesel
  • Injection Pump Type: Direct Injection
  • Aspiration: Natural
  • Emissions Compliance: Final Tier 4
  • Cylinders/Displacement: Three, 100.2 cu in. (1.642 L)
  • Number of Cylinders: Three
  • Cylinder Liners: Cast-in-Block
  • Bore and Stroke: 3.46 x 3.54 in. (88 x 90 mm)
  • Compression Ratio: 19.1:1
  • Lubrication: Pressurized
  • Cooling System: Water Pump
  • Air Cleaner: Dual Element
  • Engine Torque at Rated Speed: 64.5 lb-ft (87.5 Nm)
  • Fuel Tank Capacity: 8.5 U.S. gal. (32 L)

Electrical

  • Battery Size: 500 CCA
  • Alternator (12-V): 85 Amp
  • Starter Size: 1.9 hp (1.4 kW)

Fuel System

  • Type: Direct Injection

Transmission

  • Standard Transmission: Hydrostatic Transmission (HST)
  • Final Drive: Spur Gear
  • Brakes: Wet Disc
  • Steering: Power Steering
  • Axle Capacity:
    • Front: 1,940 lb (880 kg)
    • Rear: 3,968 lb (1,800 kg)
  • Creeper: No
  • Cruise Control: Standard
  • Differential Lock: Yes

Hydraulics

  • Type: Open Center
  • Pump Rated Output:
    • Steering: 4 gpm (15 L/min)
    • Implement: 5.3 gpm (20.2 L/min)
    • Total Flow: 9.3 gpm (35.2 L/min)
  • Pump Type: Dual Gear
  • Maximum Operating Pressure: 2,495 psi (172 bar)
  • Draft Control Sensing: Position Control
  • Remote Control Valves Available: Up to Three

3-Point Hitch

  • Type: Category 1
  • Lift Capacity (24 in. Behind Link Arms): 1,356 lb (615 kg)

Power Take-Off (PTO)

  • Standard:
    • Rear: 543 rpm
    • Mid: 1,998 rpm
  • Control: Independent
  • Clutch: Wet Disc
  • Brake (for Mid and Rear PTO): Wet Disc

Fluid Capacities

  • Crankcase with Filter: 4.8 qt (4.5 L)

Final Drive

  • Type: Spur Gear
  • Differential Lock: Yes

Operator Station

  • Rollover Protective Structure: Foldable (ASABE S478 Certified)
  • Platform: Semi-Flat

Dimensions

  • Wheelbase: 67.8 in. (1,723 mm)
  • Turning Radius (with Brakes): 8.07 ft (2.46 m)
  • Approximate Shipping Weight:
    • Open Station: 2,879 lb (1,306 kg)
    • Cab: Not Applicable

Tires

  • Front:
    • R1 Ag: 7.00-12
    • R3 Turf: 23×8.50-14
    • R4 Industrial: 23×8.50-14
    • R3 Turf Radial: 200/60-R15
  • Rear:
    • R1 Ag: 12.4-16
    • R3 Turf: 14-17.5
    • R4 Industrial: 14-17.5
    • R3 Turf Radial: 300/70-R20

Miscellaneous

  • Toolbox: Yes
  • Tilt Steering Wheel: Yes
  • 12-V Outlet: Yes

 

2 Series Compact Tractors

Compact Tractor Attachments